Sensormatic Intellex Instrukcje Operacyjne Pobierz pdf (Strona 36)

Installation and Operating Instructions

20 System Setup

STARTING THE INTELLEX UNIT

CAUTION: Before connecting power, set the voltage switch to the appropriate

voltage (“115” or “230”).

To start up the Intellex unit, simply plug it in. If the unit does not power up, insert the

special tool provided in the pinhole beneath the power indicator to turn on unit

power.

CAUTION: Do NOT modify any BIOS or system settings. Do NOT reconfigure

any hard drives. Otherwise, you will affect unit operation.

During the power-up cycle, the Intellex splash screen appears. If you are powering up

the unit for the first time, a message may appear with the splash screen. Do not press

any buttons on the front panel or any keys on the keyboard until this screen

disappears.

Wait at least two minutes for the message and/or the splash screen to disappear.

Otherwise, you may interrupt the startup process and affect unit operation. If the

splash screen does not disappear after two minutes, see the Intellex Quick

Reference/Troubleshooting Guide.

CAUTION: Do NOT install any other software, including screen savers, or you

will affect unit operation.

When the main screen appears, the unit begins showing live video from the attached

cameras, based on the schedule.

NOTE: Security is disabled at the factory. However, if the unit displays the login

screen, enter the administrator’s default PIN code (1234). See Logging In on

page 42 and for more information.

Configure the unit in the following order:

1. Regional settings (page 22)

2. Mouse settings (page 23)

3. Time zone settings (page 24)

4. Network settings (for Network Client only) (page 25)

5. Printer settings (page 30)

6. Language selection (page 31)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 237 238

Brak uwag

Sensormatic Intellex Instrukcje Operacyjne Strona 36