Sensormatic Intellex Instrukcje Operacyjne Pobierz pdf (Strona 211)

Intellex RMS Digital Video Management System

Installation and Use of Accessories 195

3. Type in a name for the text stream and select a COM port. Do not select

“Unselected” or any COM port less than COM 3.

4. Set up the other serial port parameters to match the data source.

5. Click the Camera Associations tab and select the camera(s) that will be associated

with this text stream.

NOTE: Text will only be recorded when the associated cameras are recording video.

6. Click OK to close the window and save the settings.

Connecting the Data Source

The data source must be connected to the COM port configured in the Intellex

application software and the data must be present on Pin 2 of the DB-9 connector that

plugs into the port expander. If the data is on Pin 3, then a null modem adapter or

cable must be used.

To verify the correct COM port, connect to the port expander and send some data

while Intellex is recording. The indicator on the port expander will flash amber when

data is received by Intellex. If it does not flash amber, try a different input.

Verifying Data Recording

To verify data has been recorded, playback the video from the associated camera.

Click the “A” button to open the text display window. The text stream name should

be in the box at the bottom of the text window.

NOTE: The text stream name is not displayed in this box until some text data is

actually recorded. You should be able to use the image playback controls

and/or the text scroll controls to see the text data. It is a good idea to restart

the Intellex and verify that it is still recording on the same ports. You do not

want a power failure or watchdog timer reset to result in lost data after

restarting.

Port Expander Indicators

The front of the port expander has an illuminated indicator that is used to display

status. The display states are:

Green (slowly flashing) USB connection to the Intellex unit has been

established. No serial data being recorded.

Amber (steady or

flashing)

Serial data is being sent to the Intellex unit.

Red USB error. Expander is not ready to send data to the

Intellex unit.

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 237 238

Brak uwag

Sensormatic Intellex Instrukcje Operacyjne Strona 211