Sensormatic Intellex Instrukcje Operacyjne Strona 1

Intellex RMS Digital Video Management SystemInstallation and Operating InstructionsVersion 3.1Part Number 8200-0351-9900 A0

Installation and Operating Instructions xTime Zone Settings ...

Installation and Operating Instructions 84 Setup OptionsCopying a Camera Schedule1. Select the appropriate screen: Weekday, Weekend or Holiday.2. Mo

Intellex RMS Digital Video Management SystemSetup Options 85To configure an active or alarmed segment:1. Select the segment to configure.2. Click th

Installation and Operating Instructions 86 Setup OptionsTo copy all segments from one camera to another:1. Move the mouse pointer over the name of th

Intellex RMS Digital Video Management SystemSetup Options 87To paste segment(s) and filter(s):NOTE: This option is disabled until a segment with a con

Installation and Operating Instructions 88 Setup OptionsTo delete a segment for a camera:1. Select the segment to delete.2. Click the right mouse bu

Intellex RMS Digital Video Management SystemSetup Options 89.Select another segment for configuration. Otherwise, click OK to accept the configuration

Installation and Operating Instructions 90 Setup OptionsConfiguring an Alarmed SegmentUse the Alarmed Segment screen to configure the pre-alarm record

Intellex RMS Digital Video Management SystemSetup Options 91Select another segment for configuration. Otherwise, click OK to accept the configuration

Installation and Operating Instructions 92 Setup OptionsLive Filter ConfigurationNOTE: Before following any procedures in this section, select the liv

Intellex RMS Digital Video Management SystemSetup Options 93To define the target area(s):NOTE: You can configure one or more motion detection target a

Intellex RMS Digital Video Management SystemxiCamera ...

Installation and Operating Instructions 94 Setup OptionsNOTE: To erase the last endpoint, double-click the right mouse button.b. Move the mouse pointe

Intellex RMS Digital Video Management SystemSetup Options 951. Set the Sensitivity: 1 to 100.2. Move the mouse pointer to the image area.3. Draw th

Installation and Operating Instructions 96 Setup Options• Set at least three endpoints. Then hold the mouse pointer over the last endpoint and double-

Intellex RMS Digital Video Management SystemSetup Options 97NOTE: You can only configure one light change target area at a time.1. Set the Sensitivit

Installation and Operating Instructions 98 Setup OptionsNOTE: The pointer changes to if it is dragged to an invalid location.c. Click the mouse butt

Intellex RMS Digital Video Management SystemSetup Options 99Where Motion Detection is generic, Motion Exception is specific. With Motion Exception, yo

Installation and Operating Instructions 100 Setup OptionsIn order to compare both types of motion filters on a single camera, loop that camera’s signa

Intellex RMS Digital Video Management SystemSetup Options 1015. Click Setup and the Motion Exception screen appears. A segment must be defined for th

Installation and Operating Instructions 102 Setup OptionsActive Zone Settings(page 103)NOTE: You can use the default settings for size, speed and dire

Intellex RMS Digital Video Management SystemSetup Options 103Active Zone SettingsWhen setting up Motion Exception filters to search for or filter an e

Installation and Operating Instructions xiiRegular Schedule Popup Menu ...

Installation and Operating Instructions 104 Setup OptionsDirectionTo specify the direction(s) in which the object must be moving, select the Direction

Intellex RMS Digital Video Management SystemSetup Options 1057. Click the Shape pull-down menu and select Ellipse, Rectangle or Custom shape. Define

Installation and Operating Instructions 106 Setup OptionsEnvironmental FactorsSeveral factors may reduce the effectiveness of object tracking when usi

Intellex RMS Digital Video Management SystemSetup Options 107Occlusions and obstructionsBe sure to set up the camera so that there are no objects that

Installation and Operating Instructions 108 Setup OptionsUse Single Camera ScheduleSelect the Use Single Camera Schedule option to record images from

Intellex RMS Digital Video Management SystemSetup Options 109Data Lifetime TabUse the Data Lifetime tab to enable or disable deletion of selected vide

Installation and Operating Instructions 110 Setup OptionsCamera Selectable Rate OptionYou can assign a higher or lower recording rate to each camera o

Intellex RMS Digital Video Management SystemSetup Options 111Recording Rate DescriptionsThe following terms are used to describe various types of reco

Installation and Operating Instructions 112 Setup OptionsAuto Rate ModeAuto Rate Mode allows the Intellex unit to establish camera rates automatically

Intellex RMS Digital Video Management SystemSetup Options 113Use Auto Rate Mode1. Select Use Auto Rate Mode from the Mode tab. 2. Set a Normal Rate

Intellex RMS Digital Video Management SystemxiiiText Option ...

Installation and Operating Instructions 114 Setup OptionsClick Cancel to cancel the changes. Click Help to display online help for this screen.When a

Intellex RMS Digital Video Management SystemSetup Options 115If you drag the green slider to the right, the two sliders will separate and the gray tab

Installation and Operating Instructions 116 Setup OptionsTEX T O P T I O NThe Text option allows you to configure the Intellex unit to record one or

Intellex RMS Digital Video Management SystemSetup Options 117Defining a Text Stream Use the Add button to define the text stream. From the Text Stream

Installation and Operating Instructions 118 Setup OptionsAdding a Text Stream1. From the Text Stream Setup screen, click Add. The Text Source tab ap

Intellex RMS Digital Video Management SystemSetup Options 119ADVANCED TEXTThe Advanced Text feature lets you define sets of complex criteria that you

Installation and Operating Instructions 120 Setup OptionsOn the Alarms tab, click the Build Criteria button. The Advanced Text Criteria screen is disp

Intellex RMS Digital Video Management SystemSetup Options 121And Value isFound Returns any results that are found. This is the default.Less Than Retur

Installation and Operating Instructions 122 Setup OptionsTransaction DefinitionsTo further narrow a text stream search, use a Transaction Definition.

Intellex RMS Digital Video Management SystemSetup Options 123Alarms TabOn the Alarms tab, click the button for an existing set of criteria to apply th

Installation and Operating Instructions xivPlayback Operation ...

Installation and Operating Instructions 124 Setup OptionsEdit an Advanced Text Search1. Click the Build Criteria button.2. Select the set of criteri

Intellex RMS Digital Video Management SystemSetup Options 125AUDIO OPTIONThe Audio option allows you to set the output volume and record volume for au

Installation and Operating Instructions 126 Setup OptionsCamera Associations TabOn the Camera Associations tab, specify one or more video inputs (came

Intellex RMS Digital Video Management SystemSetup Options 127SECURITY OPTIONThe Security option allows the system administrator to define the name, pe

Installation and Operating Instructions 128 Setup OptionsClassic SecurityIf Classic Security mode is enabled, a user must log in using a PIN. Once val

Intellex RMS Digital Video Management SystemSetup Options 129Adding a New UserUse Add to define the security information (name, PIN and privileges) fo

Installation and Operating Instructions 130 Setup OptionsText Streams(page 116)This privilege authorizes this user to enable Text Stream recording.Dat

Intellex RMS Digital Video Management SystemSetup Options 131Select OK to accept the new user configuration as displayed and return to the user list s

Installation and Operating Instructions 132 Setup OptionsEnabling/Disabling SecurityNOTE: This function is only available to the Administrator. The En

Intellex RMS Digital Video Management SystemSetup Options 133RECORD MODE OPTIONThe Record Mode option allows you to configure how the unit records ima

Intellex RMS Digital Video Management SystemxvSelecting a Segment to Review ...

Installation and Operating Instructions 134 Setup OptionsClick OK to accept the displayed record mode options. Click Cancel to cancel the changes. Cli

Intellex RMS Digital Video Management SystemSetup Options 135Then it displays the Image database is full screen. Select one of the following options a

Installation and Operating Instructions 136 Setup OptionsALARMS OPTIONThe Alarm option allows you to configure alarm operation for the unit. NOTE: You

Intellex RMS Digital Video Management SystemSetup Options 137Click OK to accept the displayed alarm setup options, as well as any changes on the other

Installation and Operating Instructions 138 Setup OptionsAlarm In Names TabUse the Alarm In Names tab to define the name of each alarm input. These na

Intellex RMS Digital Video Management SystemSetup Options 139DISPLAY OPTIONThe Display option allows you to configure how the unit displays live video

Installation and Operating Instructions 140 Setup OptionsClick OK to accept the displayed mode settings. Click Cancel to cancel the changes. Click Hel

Intellex RMS Digital Video Management SystemSetup Options 1413. Click the grid location for the selected camera. The name of the camera displays in i

Installation and Operating Instructions 142 Setup OptionsDATE/TIME OPTIONThe Date/Time option allows you to change the unit’s date and time settings,

Intellex RMS Digital Video Management SystemSetup Options 143PORT ADDRESS OPTIONIn the Port Address option you can specify a fixed port address for th

Installation and Operating Instructions xviPhysical Characteristics ...

Installation and Operating Instructions 144 Setup OptionsSTORAGE OPTIONUse the Storage option to configure databases located on volumes that are avail

Intellex RMS Digital Video Management SystemSetup Options 145Add VolumeCAUTION: Do not attempt to add/remove/convert volumes to the database whenany o

Installation and Operating Instructions 146 Setup Options

Playback Operation 147PLAYBACK OPERATIONThe following is a list of the topics discussed in this chapter.• Playback Screen • Using Play/Pause • Selecti

Installation and Operating Instructions 148 Playback OperationPLAYBACK SCREENThe playback screen can be accessed in several ways.From the main screen,

Intellex RMS Digital Video Management SystemPlayback Operation 149The playback screen controls and indicators are described below:1. Begin flag — In

Installation and Operating Instructions 150 Playback Operation6. Slider — Drag to select any starting point in a video segment by moving the slider c

Intellex RMS Digital Video Management SystemPlayback Operation 15114. Screen Formats — Click to change the live display format. If in playback mode, t

Installation and Operating Instructions 152 Playback OperationUSING PLAY/PAUSEUse the Play/Pause button to control playback speed and direction. Click

Intellex RMS Digital Video Management SystemPlayback Operation 1534. To return to normal speed (Play mode) or to pause playback (Pause mode), simply

Introduction 1INTRODUCTIONThe Intellex® RMS digital video management system combines multiplexing, alarm and event detection, and image recording from

Installation and Operating Instructions 154 Playback OperationMulti-Camera PlaybackMulti-Camera playback allows you to view more than one camera durin

Intellex RMS Digital Video Management SystemPlayback Operation 155NOTE: A camera that has no video for the current playback time will display a dark b

Installation and Operating Instructions 156 Playback OperationSelect Generate alarm. The unit generates an alarm for the selected camera and processes

Intellex RMS Digital Video Management SystemPlayback Operation 157Full Screen OperationFrom the playback screen, click the Full Scrn button to switch

Installation and Operating Instructions 158 Playback OperationImage Area ZoomAt any time, in either menu mode or full-screen mode, you can zoom in on

Intellex RMS Digital Video Management SystemPlayback Operation 159AudioNOTE: Audio is a protected feature. You must possess the Audio Enable, Audio Pl

Installation and Operating Instructions 160 Playback OperationSELECTIVE EXPORTNOTE: If you are in Multi-Channel Playback mode, the cameras that you ar

Intellex RMS Digital Video Management SystemPlayback Operation 1612. Deselect (click on) Export to CD-R(W) to enable the Export Directory option.Expo

Installation and Operating Instructions 162 Playback OperationPLAYBACK TOOLSClick the Tools button on the Playback screen to display the image enhance

Intellex RMS Digital Video Management SystemPlayback Operation 163Sharpen Use this option to sharpen the zoomed area of the image. The unit reduces th

Installation and Operating Instructions 2 IntroductionFEATURES• The Activity Log provides a record of all activity that a user has performed on an Int

Installation and Operating Instructions 164 Playback OperationClicking the mouse pointer has no effect once the image is displayed at its original siz

Intellex RMS Digital Video Management SystemPlayback Operation 1651. Display and enhance the image, as required. Click Save. A selection dialog appea

Installation and Operating Instructions 166 Playback OperationColor/Light ToolsUse the color/light tools to adjust the hue, saturation and lightness o

Intellex RMS Digital Video Management SystemPlayback Operation 167Balance Light ToolUse the Balance Light tool to balance the brightness of the image.

Installation and Operating Instructions 168 Playback OperationSharpen ToolUse the Sharpen Tool to reduce the amount of blur in the image. It sharpens

Search Operation 169SEARCH OPERATIONThe Search function allows you to search the image database and text streams using a variety of criteria. The foll

Installation and Operating Instructions 170 Search OperationSEARCH MODE SCREENFrom either the main screen or the playback screen, click the Search but

Intellex RMS Digital Video Management SystemSearch Operation 1712. Click Play to begin playing the video segment. The playback screen appears.Click C

Installation and Operating Instructions 172 Search OperationUsing Images within:1. Click the Images within indicator. The unit enables the associated

Intellex RMS Digital Video Management SystemSearch Operation 173Alarm TabUse the Alarm tab to search for video segments based on alarm information.NOT

Intellex RMS Digital Video Management SystemIntroduction 3• Compatible with color and B&W video cameras or other NTSC/EIA (PAL/CCIR) standard comp

Installation and Operating Instructions 174 Search Operation3. Click the Specific Filter indicator. The unit enables the filter name box. Click the d

Intellex RMS Digital Video Management SystemSearch Operation 175Using Images within:1. Click the Images within indicator. The unit enables the associ

Installation and Operating Instructions 176 Search OperationTo select a camera:1. Click the down arrow. A list of camera names appears in camera numb

Intellex RMS Digital Video Management SystemSearch Operation 177Motion DetectionUse the Motion Detection screen to configure the target area for the m

Installation and Operating Instructions 178 Search Operation4. Click the down arrow in the date box to display the calendar. Click left arrow to sele

Intellex RMS Digital Video Management SystemSearch Operation 179WORKING WITH SEARCH RESULTSWhenever a search is started, the unit displays the results

Installation and Operating Instructions 180 Search Operation

Alarm Operation 181ALARM OPERATIONThis chapter describes alarm operation on the Intellex unit. The Intellex unit detects and responds to four types of

Installation and Operating Instructions 182 Alarm OperationMECHANICAL ALARMSA mechanical alarm occurs when there is a contact closure or polarity chan

Intellex RMS Digital Video Management SystemAlarm Operation 183Once the unit exits the alarm state, it returns to the previous display mode, record mo

Installation and Operating Instructions iiNoticeThe information in this manual was current when published. The manufacturer reserves the right to revi

Installation and Operating Instructions 4 IntroductionBASIC INTELLEX SYSTEMA sample configuration is shown below.Figure 2 — Basic Intellex RMS System

Installation and Operating Instructions 184 Alarm OperationOnce the unit exits the alarm state, it returns to the previous display mode, record mode a

Intellex RMS Digital Video Management SystemAlarm Operation 185Generated AlarmsAt any time, the operator can flag specific activity as an alarm event,

Installation and Operating Instructions 186 Alarm OperationAlarm GroupsDuring normal operation, the Intellex unit samples cameras in camera number ord

Intellex RMS Digital Video Management SystemAlarm Operation 187ALARM REVIEW SCREENWhen one or more alarms have not been reviewed, the Alarms indicator

Installation and Operating Instructions 188 Alarm OperationTo clear an alarm:1. Click Clear. A confirmation screen appears.2. Click Yes to clear the

Intellex RMS Digital Video Management SystemAlarm Operation 189ALARM CONNECTORSThe alarm connectors accept up to 8 alarm inputs and 8 alarm outputs. U

Installation and Operating Instructions 190 Alarm OperationNOTE: The Time Sync Signal (Alarm In 17) is used to reset the system time of the Intellex t

Installation and Use of Accessories 191INSTALLATION AND USE OF ACCESSORIESThe following is a list of the topics discussed in this chapter. • USB Flopp

Installation and Operating Instructions 192 Installation and Use of AccessoriesUSB Floppy Drive-RDVFLP01The Intellex USB floppy drive can be used to s

Intellex RMS Digital Video Management SystemInstallation and Use of Accessories 193USB/RS-232 4-Port Expander-RDVEXP01The Intellex USB/RS-232 4-Port E

Intellex RMS Digital Video Management SystemIntroduction 5SAMPLE NETWORK CONFIGURATIONOne or more Intellex units can be connected over a TCP/IP local

Installation and Operating Instructions 194 Installation and Use of AccessoriesCOM Port AssignmentsThese are the COM port assignments that are expecte

Intellex RMS Digital Video Management SystemInstallation and Use of Accessories 1953. Type in a name for the text stream and select a COM port. Do no

Installation and Operating Instructions 196 Installation and Use of AccessoriesSpeakers-RDVSPK01The Intellex Speakers can be used to listen to recorde

Record Capacity 197RECORD CAPACITYThe following factors affect Intellex record capacity:NOTE: Since each installation is different, your unit’s record

Installation and Operating Instructions 198 Record CapacityThe following charts show the relationship between activity type, record capacity and image

Intellex RMS Digital Video Management SystemRecord Capacity 199To estimate the unit’s maximum record capacity:1. Identify the image quality that best

Installation and Operating Instructions 200 Record Capacity3. Use the following table to identify the maximum hours per gigabyte 60 HZ RECORDING DURA

Intellex RMS Digital Video Management SystemRecord Capacity 201ACTIVITY LEVELSMultiply the number of hours by the size of the total data storage capac

Installation and Operating Instructions 202 Record Capacity

Technical Specifications 203TECHNICAL SPECIFICATIONSThe following specifications only apply to the Intellex RMS unit. The manufacturer reserves the ri

Installation and Operating Instructions 6 IntroductionABOUT RAID AND RAID 5 The Intellex RMS system is configured to support a RAID 5 type of disk arr

Installation and Operating Instructions 204 Technical SpecificationsProgrammable SettingsCamera Names Camera1–Camera8Camera Termination 75 OhmsSecurit

Intellex RMS Digital Video Management SystemTechnical Specifications 205Video FormatVideo LevelAlarmDisplayNOTE: Pixel count reflects digital display

Installation and Operating Instructions 206 Technical SpecificationsRecord OptionsOn-Screen ControlsRear Panel ConnectorsRecord Mode Linear or Circula

Intellex RMS Digital Video Management SystemTechnical Specifications 207Components Power SupplyNOTE: Before connecting power, set the voltage switch t

Installation and Operating Instructions 208 Technical SpecificationsAccessoriesPhysical CharacteristicsEnvironmental RequirementsRDVNC-31 Network Clie

Intellex RMS Digital Video Management System209AAbout Intellex ... 59Button ...

Installation and Operating Instructions210Add to list ... 81Alarms ...

Intellex RMS Digital Video Management System211ColorColor (input and output) ... 205Gray Shades ...

Installation and Operating Instructions212DDAT — see Tape:Digital AudioDataStorage ... 3Data Life

Intellex RMS Digital Video Management System213DurationAlarm ...204–205DwellLive Sequencer ...

Intellex RMS Digital Video Management SystemIntroduction 7ACCESSORIESIntellex USB Floppy DriveThe USB floppy drive can be used to save Intellex config

Installation and Operating Instructions214Hardware Information ... 59Help ...

Intellex RMS Digital Video Management System215LicenseSoftware ... vUpgrade ...

Installation and Operating Instructions216Cameras ... 64Network ...

Intellex RMS Digital Video Management System217PowerIndicators ... 11Input ...

Installation and Operating Instructions218SettingsRegular ScheduleCameras ... 72Quality ...

Intellex RMS Digital Video Management System219Setup ...62, 129, 132Setup Privilege ...

Installation and Operating Instructions220SourcesConnecting Text ... 194Speakers ...

Intellex RMS Digital Video Management System221Zone Setup ... 24Time SpanStatus ...

Installation and Operating Instructions222WindowsComputer Name ... 25Control Panel ...

Installation and Operating Instructions 8 Introduction

Installation 9INSTALLATIONThe following is a list of the topics discussed in this chapter.• Finding a Location • Front Panel • Rear Panel • Installing

Installation and Operating Instructions 10 InstallationFINDING A LOCATIONSelect a location for the Intellex unit that is clean and dry and where tempe

Intellex RMS Digital Video Management SystemInstallation 11FRONT PANELThe following diagram shows the elements of the Intellex RMS front panel. A desc

Installation and Operating Instructions 12 Installation9. Removable Hard Drives --- Six removable hard drives. In case of a defective hard drive, the

Intellex RMS Digital Video Management SystemInstallation 13REAR PANELThe following diagram shows the elements of the Intellex unit rear panel. A descr

Intellex RMS Digital Video Management SystemiiiWARNINGSWARNING: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSID

Installation and Operating Instructions 14 Installation7. Network — This RJ-45 connector connects the unit to a local area network. The unit supports

Intellex RMS Digital Video Management SystemInstallation 15INSTALLING THE HARD DRIVES The six hard drives packaged with the Intellex RMS must be insta

Installation and Operating Instructions 16 InstallationREQUIRED CONNECTIONSCAUTION: Protect the unit against lightning. If a portion of a cable is ins

Intellex RMS Digital Video Management SystemInstallation 17OPTIONAL CONNECTIONSAlarmsCAUTION: Protect the unit against lightning. If a portion of a ca

Installation and Operating Instructions 18 InstallationNetworkNOTE: Do NOT connect the Intellex unit to a network unless you also install the Network

System Setup 19SYSTEM SETUPThe following is a list of the topics discussed in this chapter.• Starting the Intellex Unit • Exiting to Windows • Regiona

Installation and Operating Instructions 20 System SetupSTARTING THE INTELLEX UNITCAUTION: Before connecting power, set the voltage switch to the appro

Intellex RMS Digital Video Management SystemSystem Setup 21EXITING TO WINDOWSCAUTION: Do NOT modify any BIOS or system settings. Do NOT reconfigureany

Installation and Operating Instructions 22 System SetupREGIONAL SETTINGSYou must configure the unit to display dates and times in the format appropria

Intellex RMS Digital Video Management SystemSystem Setup 23MOUSE SETTINGSYou can configure the mouse for either right- or left-handed operation. The d

Installation and Operating Instructions ivChanges or modifications not expressly approved by the party responsible for compliance could void theuser’s

Installation and Operating Instructions 24 System SetupTIME ZONE SETTINGSYou must configure the unit for operation in your time zone. The unit will ke

Intellex RMS Digital Video Management SystemSystem Setup 25NETWORK SETTINGSYou must configure the network settings for Network Client operation. You m

Installation and Operating Instructions 26 System SetupChanging the Workgroup1. To change the Workgroup, type the new name in the box labeled Workgro

Intellex RMS Digital Video Management SystemSystem Setup 27SETTING UP AUTOLOGINIf the Intellex unit prompts you to log on each time you power it on, f

Installation and Operating Instructions 28 System SetupCONFIGURING INTELLEX 3.1 FOR DIAL-UP NETWORKINGIf your Intellex unit did not have a modem insta

Intellex RMS Digital Video Management SystemSystem Setup 29Procedure for Forcing an Intellex modem to DisconnectNOTE: The first two procedures require

Installation and Operating Instructions 30 System SetupPRINTER SETTINGSTo change the default printer:1. From the Control Panel screen, double-click t

Intellex RMS Digital Video Management SystemSystem Setup 31LANGUAGE SETUPThe Intellex unit is configured for a specific language at the factory. It wi

Installation and Operating Instructions 32 System SetupSHUTTING DOWN AND RESTARTING SYSTEM1. From the Windows desktop, click the Start button. The St

Configuring the System 33CONFIGURING THE SYSTEMThe following is a list of the topics discussed in this chapter.• Setting Up Messaging Functions • Logg

Intellex RMS Digital Video Management SystemvLICENSE INFORMATIONREAD THIS LICENSE AGREEMENT BEFORE OPENING THE DISK PACKAGE, INSTALLING THESOFTWARE, O

Installation and Operating Instructions 34 Configuring the SystemSETTING UP ALERTSBefore you can use the Intellex RMS system effectively, you need to

Intellex RMS Digital Video Management SystemConfiguring the System 35NOTE: Contact your network administrator if you do not know the required informat

Installation and Operating Instructions 36 Configuring the System

Main Screen 37MAIN SCREENNOTE: Security is disabled at the factory. However, if the unit displays the login screen, enter the administrator’s default

Installation and Operating Instructions 38 Main Screen1. On-screen Controls — Use the mouse pointer to access unit functions. For a description of th

Intellex RMS Digital Video Management SystemMain Screen 39VCR Play/Pause Control — You can control play/pause as well as playback direction and speed

Installation and Operating Instructions 40 Main Screen

Live Operation 41LIVE OPERATIONThe following is a list of the topics discussed in this chapter.• Logging In • Changing Users • Controlling Image Displ

Installation and Operating Instructions 42 Live OperationLOGGING INNOTE: If system security is enabled, you must enter a valid PIN code before the uni

Intellex RMS Digital Video Management SystemLive Operation 43CHANGING USERSNOTE: This option is only available if system security is enabled (see Secu

Installation and Operating Instructions viLimited WarrantySensormatic warrants that the recording medium on which the Software is recorded, and the do

Installation and Operating Instructions 44 Live OperationCONTROLLING IMAGE DISPLAYImage display is located in the central area of the screen, where th

Intellex RMS Digital Video Management SystemLive Operation 45Image Area Popup MenuThe Image Area Popup menu provides access to several live display se

Installation and Operating Instructions 46 Live OperationSwitching to Menu/Full Screen1. Move the mouse pointer over the camera’s image in the image

Intellex RMS Digital Video Management SystemLive Operation 474. Select the desired screen format. The unit immediately changes the image area.Image A

Installation and Operating Instructions 48 Live OperationCamera SequencingThe unit can display cameras sequentially in any available format. Cameras d

Intellex RMS Digital Video Management SystemLive Operation 49Dome Camera ControlConnection to a dome camera is indicated by the dome icon that appears

Installation and Operating Instructions 50 Live OperationUnit ScheduleImages from cameras that are disabled in the schedule will not display. This hel

Intellex RMS Digital Video Management SystemLive Operation 51REVIEWING UNIT STATUSAt any time, you can review unit and camera status. When you click t

Installation and Operating Instructions 52 Live OperationClick Close to cancel this operation. Click Help to display online help for the screen.Record

Intellex RMS Digital Video Management SystemLive Operation 53UTILITY OPTIONSThe Utility Options screen provides access to various system utility funct

Intellex RMS Digital Video Management SystemviiPurchase Date: _______________________________________Serial Number: _________________________________

Installation and Operating Instructions 54 Live OperationBegin RecordWhen the image database fills completely, recording stops and the unit displays a

Intellex RMS Digital Video Management SystemLive Operation 55Creating an Activity Log1. From the main screen, click the Utility button. The Utility O

Installation and Operating Instructions 56 Live OperationClick Close to cancel this operation. Click Help to display online help for the screen.Genera

Intellex RMS Digital Video Management SystemLive Operation 57Click OK to generate alarms for all selected cameras and return to the Utility Options sc

Installation and Operating Instructions 58 Live OperationLog OutUse this option to inform the system that you are transferring control to a different

Intellex RMS Digital Video Management SystemLive Operation 59Exit to SystemCAUTION: Do NOT modify any BIOS or system settings. Do NOT reconfigureany h

Installation and Operating Instructions 60 Live Operationto each network card). The MAC Address information is needed when ordering software upgrades.

Setup Options 61SETUP OPTIONSThe Intellex Setup Options allow you to access each of the system settings. You can configure the Cameras, Security, Sche

Installation and Operating Instructions 62 Setup OptionsSETUP OPTIONS SCREENAccess each system setting through the Setup Options screen. Click the Set

Intellex RMS Digital Video Management SystemSetup Options 63Click Close to cancel and to return to the main screen. Click Help to display online help

Installation and Operating Instructions viii

Installation and Operating Instructions 64 Setup OptionsCAMERAS OPTIONThe Cameras option allows you to define a name, termination settings, set the ga

Intellex RMS Digital Video Management SystemSetup Options 65Click OK to accept the changes made. Click Cancel to cancel the changes. Click Help to dis

Installation and Operating Instructions 66 Setup Options1. From the main screen, click the Setup button. The Setup Options screen appears.2. Click t

Intellex RMS Digital Video Management SystemSetup Options 67Click OK to accept the changes made. Click Cancel to cancel the changes. Click Help to dis

Installation and Operating Instructions 68 Setup OptionsUnauthorized UsersWhen an unauthorized user attempts to view live video from a covert camera,

Intellex RMS Digital Video Management SystemSetup Options 69Exporting with a Covert CameraWhen an unauthorized user opens the Export screen, all cover

Installation and Operating Instructions 70 Setup OptionsSCHEDULE OPTIONThe Schedule option allows you to configure how the unit records images under a

Intellex RMS Digital Video Management SystemSetup Options 71Quality TabUse the Quality tab to set the quality for normal operation.Select another Regu

Installation and Operating Instructions 72 Setup Options2. Click the minutes display. Click the up arrow or down arrow to display the desired minutes

Intellex RMS Digital Video Management SystemSetup Options 731. Move the mouse pointer over either the Day Filter or the Night Filter next to a camera

ixTABLE OF CONTENTSIntroduction ...

Installation and Operating Instructions 74 Setup OptionsCopying and Pasting a Filter 1. Select the filter to copy.2. Click the right mouse button to

Intellex RMS Digital Video Management SystemSetup Options 75Click OK to accept the new schedule mode, and return to the Setup Options screen. Click Ca

Installation and Operating Instructions 76 Setup OptionsUse Custom Schedule The Use Custom Schedule option creates a custom schedule for each camera.

Intellex RMS Digital Video Management SystemSetup Options 77Time TabUse the Time tab to set the start and end times for weekends and holidays. This ta

Installation and Operating Instructions 78 Setup OptionsBy default, weekends and holidays include part of the day before and part of the day after. If

Intellex RMS Digital Video Management SystemSetup Options 79To use the weekday or weekend schedule on holidays, deselect the Include Holiday option on

Installation and Operating Instructions 80 Setup Options1. Define the segment as shown in Working with Schedule Segments on page 82.2. Use one of th

Intellex RMS Digital Video Management SystemSetup Options 81Set Holidays TabUse the Set Holidays tab to identify the days that will operate using the

Installation and Operating Instructions 82 Setup OptionsData Lifetime TabUse the Data Lifetime tab to enable or disable deletion of selected video dat

Intellex RMS Digital Video Management SystemSetup Options 838. After defining an active or alarmed segment, configure its live filter and other setti