
3-4 Operator’s Manual
Setting the AGC Mode
1. Select Camera / Lens Functions from the Dome Configuration Menu.
2. Use the Tilt control to move the highlight bar to the AGC Mode setting.
3. Press Zoom Out or Zoom In to change the setting.
• If you want the AGC to be automatic, select On.
• If you want the AGC to be manual, select Off. Then continue with Changing the
AGC Manual Gain Setting on page 3-4.
The default setting is On.
4. Do one of the following:
• If you want to make changes to the line lock setting, refer to Setting Line Lock on
page 3-2.
• If you want to make changes to the white balance settings, refer to Adjusting
White Balance on page 3-5.
• If you are finished making changes, press and hold Iris Close, then press Focus
Near or Focus Far to save your changes and exit the utility.
2
• If you want to make changes to other settings, use the Tilt control to move the
highlight bar to Exit, then press Focus Far. The Dome Configuration Menu
appears. Continue with What To Do Next on page 3-8.
Changing the AGC Manual Gain Setting
Note
AGC Mode must be set to Off to make changes to this setting.
1. Select Camera / Lens Functions from the Dome Configuration Menu.
2. Use the Tilt control to move the highlight bar to the AGC Gain setting.
3. Press Zoom Out to decrease value of the setting.
Press Zoom In to increase the value of the setting.
The values for the setting range from 0 to 1128.
4. Do one of the following:
• If you want to make changes to the line lock setting, refer to Setting Line Lock on
page 3-2.
• If you need to make adjustments in the white balance, refer to Adjusting White
Balance on page 3-5.
• If you are finished making changes, press and hold Iris Close, then press Focus
Near or Focus Far to save your changes and exit the utility.
3
2
This command is not supported with Manchester.
Komentarze do niniejszej Instrukcji