Sensormatic SpeedDome Ultra IV Instrukcja Operatora Pobierz pdf (Strona 10)

1-2 Operator's Manual

What Is the Dome Configuration Utility?

The dome configuration utility provides a means to setting features for your camera dome via

a text overlay menu. You access this menu using a keystroke combination. Refer to your

keyboard or Touch Tracker operating instructions for the locations of the buttons referenced

in this document.

The utility provides settings relating to camera functions, alarms, text display, and password

protection. Some items supplement similar features that may be available through your

controller.

Starting the Configuration Utility

To start the configuration utility, do the following:

1. Select the dome that you need to configure. Refer to the controller operating instructions

for specific information.

2. Do one of the following:

• If the dome is installed in a SensorNet or RS-422 operating network, press and hold Iris

Open, press and hold Focus Near or Focus Far, then press Zoom Out.

• If the dome is installed in a Manchester network, turn the key switch to Prog (or disable

the system lock on the Touch Tracker), enter 66, then press Set Shot.

The following text appears on the monitor.

DOME CONFIGURATION MENU

PAN/TILT/ZOOM OPTIONS

CAMERA / LENS FUNCTIONS

ALARMS / AREAS / HOME

ON-SCREEN TEXT DISPLAY

LANGUAGE / PASSWORD

EXIT AND SAVE CHANGES

QUIT WITHOUT SAVING

RESET TO FACTORY SETTINGS

Figure 1-1: Dome Configuration Menu

Note

If you have password protection enabled for the configuration utility, the

Enter Password screen appears first. You must correctly enter the

password before the Dome Configuration Menu will appear. For

information about entering the password, refer to Password Protection on

page 1-4.

Highlight Bar:

Move with Tilt

control.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 75 76

Brak uwag

Sensormatic SpeedDome Ultra IV Instrukcja Operatora Strona 10